PRODUCT DATA

DefendAL™ Enviro Heavy Duty Extended Life Coolant/Antifreeze

DefendAL Enviro HD ELC is a virgin propylene glycol extended life coolant that contains a proprietary inhibitor system. In heavy-duty diesel applications it can provide a service life of 600,000 miles, with the addition of Extender at 300,000 miles. In automobiles this extended life Coolant/Antifreeze will provide a service life in excess of 5 years or 150,000 miles.

DefendAL Enviro HD ELC concentrate contains a inhibitor combination molybdate/nitrite to comply with ATA TMC RP 330 and ASTM D 6210 requirements for diesel coolants. It contains no added phosphates, silicates, nitrates or amines. It is a balanced combination of organic and inorganic additives and is compatible with both organic acid long life coolants and conventional inorganic coolants. In addition, our Extended Life Antifreeze will not cause turbidity, precipitation or inhibitor effectiveness reduction when mixed with other carboxylate-based coolants such as ChevronTexaco Extended Life Coolant or Dex-Cool nor with conventional coolants such as Prestone or Zerex. It is ideal for use in initial fills, coolant change-outs or top-offs.

DefendAL Enviro HD ELC meets ASTM D 3306 (automotive antifreeze), ASTM D 4985 (heavy duty antifreeze), ASTM D 6210 (fully formulated, pre-charged antifreeze) and TMC of ATA RP 330 performance requirements. It also meets or exceeds the following industry specifications as a concentrate or pre-diluted heavy-duty antifreeze/coolant for propylene glycol based coolants/antifreezes:
 
• ASTM D3306, D4985, and D6210 • J.I. Case JIC-501
• Cat EC-1 (ELC) • Mack Truck
• Chrysler MS 7170 • MTU
• Cummins 90T8-4, 14603 (service Bulletin 3666132-02) • Mercedes DBL 7700
• Detroit Diesel 7SE298
  (DDC Powercool Plus and Powercool Plus 6000)
• Navistar B-1
• Ford ESE-M97B44-A, WSE-M97B44-B • SAE J1034, J1038• TMC of ATA*: RP330
• Freightliner 48-22880 • TMC of ATA*: RP330
• GM 1825, 1899M, 6277M • Volvo
• International  
 
 
* Technology & Maintenance Council of the American Trucking Association
This antifreeze also meets the non-phosphate requirements of European OEM’s and non-silicate requirements of Japanese OEM’s.

FREEZE/BOIL PROTECTION – MAXIMUM FREEZE PROTECTION IS AT 70%

FREEZING POINTspacerBOILING POINT*
Antifreeze % º F º C º F º C
spacer
50 -21 -29 265 129
60 -50 -46 270 132
70 -80 -62 277 136
 
*Boiling Point shown using conventional 15 psi radiator cap
 
PHYSICAL PROPERTIES: Unit of Measure CONCENTRATE 50/50
Glycols Content mass % 90 min. 45 min.
Water mass % 2.9 50.1
Flash Point º F 250 NONE
Weight Per Gallon @ 60º F (15.6º C) 8.68 #/gal. 8.52 #/gal.
Silicate Content mass % NIL NIL
Product Number:   9046 9047
       
Additional Properties: Specification Typical Value ASTM Method
Chloride Content, ppm 25 max. <25 D 3634
Nitrite Content, ppm 2400 min. >2400 D 5827
Specific Gravity @ 60/60 º F. 1.115 -1.125 1.112 D 1122
Freeze Point, 50% Volume   -21º F/-29º C D 1177
Effect on engine or      
vehicle finish no effect no effect -------------
Ash Content, mass % 5 max. < 3 D 1119
pH, 50% Volume 9.8-10.6 9.8 D 1287
Reserve Alkalinity, ml 3 min. 4-5 D 1121*
Water Content, mass % 5 max. 3.0 D 1123
Color distinctive Strawberry Red -------------
Effect on Non-Metals no adverse effect no adverse effect -------------
Storage Stability ------------ > 1 year -------------
Foaming 150 mi vol., max. 35 ml D 1881
  5 sec. break, max. 2.5 sec. D 1881
Cavitation-Erosion Rating 8 min. 9 D 2809
 
* Reserve Alkalinity (RA) is a term used to indicate the amount of alkaline inhibitors present in an antifreeze formulation. It is incorrect to relate a high RA value with high-quality antifreeze. Present state-of-the-art antifreeze formulations contain new inhibitor systems that give added protection to certain metals but do not raise the RA numbers.
 
© 2007-2008 Kost USA, INC • All Rights Reserved • Terms and Conditions